Filter
Top Products
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05 3
Which Codes Do I Use?
Default feature codes are listed in this guide. Check with your System
Administrator to see if these codes have been changed. If so, write the
new codes in the blank lines and cross out the default codes. For
example:
Cnf/Trn + #46 or .
Making a Call
Hot Dialing
1. To make a call using Hot Dialing, dial the number.
2. When connected, you can continue speakerphone operation or
lift the handset and continue the conversation.
Spkr Button
1. To make a call, press Spkr.
2. Dial the number.
3. When connected, you can continue to use the speakerphone or
lift the handset and continue the conversation.
Handset
1. To make a call, lift the handset, then dial the number.
2. When connected, you can continue to use the handset or switch
to speakerphone by holding down Spkr and replacing the
handset.
Dial Directory
1. Press SK1 or Mode from your telephone (shown right). The
Select Directory menu appears.
Note
The soft keys on the
Select Directory are:
My = Personal SD Names
EXTR= Sys. SD Names
INTR = Directory No. Names
Dial = Cancel directory, get
dial tone.
2. Press the appropriate soft key
and use the dial pad to enter the first character of the name
...or if you do not select a directory, you can go directly to the
dial pad and enter a character. This makes names from all
directories available.
3. Press
Find soft key to start the Dial-directory search.
4. Press Next soft key to go through the directory until you see
the name.
5. Press Call soft key to call.
6. Press Back soft key to go back through the directory.