Filter
Top Products
OGATECH OG-R400
8 OGATECH OG-R400
3 USING THE TELEPHONE
3.1 SWITCHING THE HANDSET ON/OFF
• Press and hold to switch the handset off.
• Press again or place it in the base to switch the handset back on.
3.2 CHANGING THE LANGUAGE
Enter the "Handset" menu in order to change the language:
• Select "Menu" with the left menu key .
• Press the navigator key downwards twice.
• The "Handset" menu appears on the display. Select "OK".
• Use the navigator key to scroll through the menu and select "Language". The and
arrows indicate that further options are available. To confirm the language press "OK".
The screen displays "English saved" if you have chosen English. Your handset's menus
will be in English.
• To return to the previous menu, select "Back".
3.3 MAKING A CALL
3.3.1 Direct dialling
• Press to obtain a line.
• Dial the number to be called.
• To hang up at the end of the call, press or put the handset back on the base.
3.3.2 Pre-dialling
With the pre-dialling feature you can enter and modify a number before making the call.
• Dial a number of up to 25 digits. Press the navigator key upwards and hold to insert a
pause. The screen displays a "P".
• Select "Clear" with the right menu key to correct. Press to initiate the call. The
screen displays: "Calling 123456789". To hang up at the end of the call, press or put
the handset back on the base.
3.4 RECEIVING A CALL
When you receive an external call, the screen displays: "External Call".
To take the call:
• Press (if the handset is not on its base/charger)
or
Lift the handset off its base (if the Auto Talk option is active) (see §“7.5 Auto Answer” ).
• The call in progress icon appears on the screen. The call duration is displayed after
about 15 seconds.
3.4.1 Adjusting the ring volume during incoming call
You can adjust the ring volume with the navigator key or while the telephone is ringing.
The ring volume is displayed on the screen. There are 5 volume levels as well as the option
of turning the ringer off altogether, in which case "Volume Off" is displayed and icon
appears. This information remains on screen for about 3 seconds, or until the key is
pressed.