Topcom FIDELITY 1081 Telephone User Manual


 
4 Topcom Fidelity 1081
Topcom Fidelity 1081
5 Buttons
(See picture 1 and 2 on folded cover page)
1. Hook Switch
2. Up button ‘
3. LCD display
4. Down button ‘
5. Delete button ‘
6. Numerical key pad
7. Hands free button ‘
8. Redial button ‘
9. Handsfree LED
10. Emergency button ‘
11. Flash button ’R
12. Hands free speaker
13. Wall mounting hook
14. Line cord connector
15. Power adapter connector
16. Ring volume switch
17. Wall mounting locations
18. Ringer
19. Cable slots
20. Handsfree microphone
21. Handfree volume switch
6 Technical Data
Dialling options: DTMF(tone) / PULSE
Flash:100/300/600ms
Power adapter: Input 230VAC 50Hz / Output
6VDC - 400 mA
7 Installation
To activate the telephone, it must be connected to
the main power.
Plug one end of the supplied adapter into the
electric socket and the other end into the
connector on the bottom of the desktop
telephone (15).
Connect one end of the line cord to the
telephone line wall socket and the other end
to the bottom of the phone (14).
8 Telephone settings
8.1 Setting the date and time
When you have a subscription to the Caller ID
service and your telephone provider sends the
date and time together with the telephone
number, the phone’s clock will be set automatical-
ly.
8.2 Flash time
Press to use certain services as ‘Call Waiting’
(if this service is provided by your telephone com-
pany); or to transfer phone calls when you are us-
ing a telephone exchange (PABX).
The flash time can be selected (100/300/600ms).
8.3 Dial Mode (Tone/Puls)
8.4 Ringer volume
The ring volume can be adjusted by means of the
Ring Volume switch (16) at the bottom of the
phone.
When the display rings, the display will light up.
!
3sec
is displayed.
Select ’(Date Time)
‘01-05 12-26’ is displayed.
Enter the day, month and time
(4digits) using the numerical keypad.
To confirm.
3sec
is displayed.
3sec
Select ’(Flash time)
To confirm
Select ‘100’, ‘300’ or ‘600’ ms
To confirm
3sec
is displayed.
Select ’(Dial mode)
To confirm
Select ‘TONE’ or ‘PULSE’
To confirm
R