Filter
Top Products
6 Topcom Diablo 100/Twin/Triple/Quattro
Topcom Diablo 100/Twin/Triple/Quattro
5.10.3 Date time setting
After setting the internal ring melody and volume you can set the date and time:
DD-MM HH:MM (DD= day, MM=month, HH=houre and MM=minutes)
Enter the date and time using the number key. The flashing cursor can be moved by the scroll keys
.
Î Press again to confirm the setting and to go to the next setting below.
5.10.4 Setting the Dial mode
After setting the date/time you can set the dial mode. There are two types of dialling mode:
- 1 - DTMF/Tone dialling (the most common) (default)
OR
- 2 - Pulse dialling (for older installations)
Press ‘1’ or ‘2’ and press again to confirm the setting and to go to the next setting below.
5.10.5 Setting the Flash time
After setting the Dial mode you can set the flash time. There are two flash times:
- 1 - 100ms
OR
- 2 - 250 ms
Press ‘1’ or ‘2’ and press again to confirm the setting and to go to the next setting below.
5.10.6 Base melody and volume
The base ringer is heard. Î Select the desired melody (1-5) by entering a number (1 - 5). Î Use
the scroll keys to select the desired volume (Off or 1-5)
Î Press again to confirm the setting
and to go back to standby.
5.11 Keypad lock
When the keypad is locked, pressing any key will have no effect during standby (except holding the
key).
Press and hold the key.
Î appears on the display and the keypad is locked. Î Press twice
the k ey again to un-lock the k eypad
6Caller-ID function (CLIP)
The Topcom Diablo displays the telephone numbers of incoming calls. This function is only possible if
you are subscribed to a telephone operator that provides this service. Contact your telephone provider
for more information. When you receive a call, the numbers are saved in a Call list. This list can hold 10
telephone numbers (each of max. 20 digits). If the number is longer then 12 digits, you can press the
program key to show the other digits!
6.1 New calls
When you’ve received a new unanswered call, the CLIP symbol will blink on the display.
6.2 Consulting the Call list
Press the Call Log button . The last received call is shown on the display. If the list is empty, ‘----------
’ is shown on the display. For answered calls the -icon appears and unanswered calls the -icon
appears
Î Press the program key to show the other digits (if longer then 12) or to show the date
and time.
Î Use the scroll keys to scroll to the previous call. When you reach the top or bottom
of the list an error tone will be sounded
Î You can leave the Call list by pressing the on-hook
button.
6.3 Calling a number from the Call list
Scroll through the Call list until the desired number is shown on the display. Î Press the Off -hook
button . The number will be dialled automatically.