Filter
Top Products
22 Topcom Butler 4200/Twin/Triple/Quattro
Topcom Butler 4200/Twin/Triple/Quattro
6.1.3 Delete an entry
1. Enter the menu by pressing
2. Select PHONE BOOK using up and down keys
3. Press
4. Select DELETE using up and down keys
5. Press
6. Move through the name list using up and down keys, the list scrolls in
alphabetical order
7. Press to confirm when you find the name you want to delete or press Cancel C
key to stop
6.1.4 Delete all entries
1. Enter the menu by pressing
2. Select PHONE BOOK using up and down keys
3. Press
4. Select DELETE ALL using up and down keys
5. Press
6. Press to confirm when ‘CONFIRM?’ appears or press Cancel C key to stop
6.2 Setup prefix memory
1. Enter the menu by pressing
2. Select HANDSET using up and down keys
3. Press
4. Select PREFIX MEM using up and down keys
5. Press
6. Enter the prefix number or press Delete C key to delete
7. Press to validate
6.3 Searching a handset from the base
When Paging button on the base is pressed, all the registered handsets will ring. This
ringing will help you locate a lost handset. By pressing Paging button again or pressing
one of the handset keys, the ringing stops.
7 Managing multiple handsets
7.1 Setting up an additional handset
You can register new handsets on the base if these handsets support the DECT GAP profile.
The base can support a maximum of 4 handsets. If you already have 4 handsets, and you
want to add another one or change one handset, you must first remove a handset, then
associate the new handset.
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK