Filter
Top Products
Topcom Allure 400 5
Topcom Allure 400
ENGLISH
7.4 Set the operator prefix code
When you have subscribed at an alternative oper-
ator it sometimes is required to dial a prefix in front
of the telephone number.
When entering the prefix, the phone will automat-
ically add the prefix in front of the dialled number.
For example:
Operator prefix:
1234
Number to be dialled :
012345678
Number dialled by the phone:
1234012345678
• Press to enter the menu
• Use / to select “
DXW2S”
• Press to enter the settings
• Use / to select “ON” or “OFF”
•Press
• Enter the prefix
•Press
• Press to exit the menu
7.5 Set the alarm
You can set a wakeup alarm in the telephone.
• Press to enter the menu
• Use / to select “
$/HUW”
• Press to enter the settings
• Use / to change the digit
• Press to move to the next digit
• Finally use / to select “ON” or “OFF”
• Press to exit the menu
7.6 Set the flash time
The R-key (flash) is used for services like “Call
waiting” (if this service is provided by your tele-
phone company) or to transfer calls when the tel-
ephone is connected to a PBX-system.
Depending on the country, this flash-time can be
different.
The telephone supports 4 possibilities : 110, 300,
600 and 1000 msec.
• Press to enter the menu
• Use / to select “
)/DVK”
• Press to enter the settings
• Use / to select
• Press to exit the menu
7.7 Ringer volume
At the back panel of the telephone you find a
switch that can set three different ring vol-
umes. Choose the most comfortable volume.
7.8 Hands-free volume
At the back panel of the telephone you find a
switch that can set three different hands-
free volumes. Choose the most suitable volume
for your use.
7.9 Set the ring tone
There are 20 different ring tones to choose from.
• Press . The current ringtone can be
heard at the highest volume
• Use / to select
• After 5 seconds the telephone will go back to
idle position
7.10 Set the LCD display contrast
There are 5 LCD contrast levels.
• Press to choose the most suitable
contrast level
• After 5 seconds the telephone will go back to
idle position
8Operation
8.1 Making a call
• Enter the telephone number
• Press to delete a wrongly entered digit
• Pick up the handset or press to make a
hands-free call
During a call made with the handset you can
switch to hands-free by pressing and hanging
up the handset.
In case the telephone is connected to a PBX sys-
tem it might be necessary to add a pause after the
PBX access code. The phone can generate a 4
second pause time.
For example:
0 P 012345678
Press to enter a pause
R/ LCD
P/VIP