Filter
Top Products
10 Topcom Cocoon 95
Topcom Cocoon 95
4.4 PROGRAMMING MEMORY NUMBERS
You can program 10 indirect numbers (of max. 24 digits) in the phone’s memory.
• Press the Set button , followed by the Memory button .
• Enter the memory location (0-9).
• Enter the telephone number you wish to save on this memory location.
• Press the Memory button . You will hear a confirmation tone.
Remarks:
•All memory numbers will be erased when the default settings have been reset (see "4.18
Default settings (Reset)").
• If you wish to insert a pause, press the Redial button on the location where you want
a pause.
4.5 CALLING A MEMORY NUMBER
• Press the Line button .
• Press the Memory button , followed by the number of the memory location (0-9).
•The memory number will be dialled automatically.
• Press the Line button when you want to terminate the call.
4.6 BABYCALL
This function allows you to program one specific number (memory location 0) that will be
dialled automatically no matter what key has been pressed, except for the Set button . To
activate this function, do the following:
• Press the Set button .
• Press numerical button ‘6’.
• Press numerical button ‘1’ to activate/deactivate this function.
• Press the Memory button . You hear a confirmation tone.
Default setting: not activated
Important: Memory number [0] has to be programmed for this function. This function
is not valid when “mem 0” is not programmed.
4.7 MUTE FUNCTION
It is possible to deactivate the microphone during a conversation. Now you can speak openly
without being heard by your correspondent.
• Press the Mute button during a conversation. The microphone will be deactivated.
The MUTE symbol appears on the display.
• Press the Mute button again when you want to continue the conversation.
4.8 SETTING THE VOLUME
During a conversation you can set the volume by pressing the Set button . The indication
‘Loud Hi/Lo’ appears on the display.
Coc95_eur.book Page 10 Monday, January 5, 2004 10:07 AM