Filter
Top Products
English
10
Caller-ID function (CLIP)
8 Caller-ID function (CLIP)
The Topcom Butler 900 displays the telephone numbers of incoming calls. This function is only
possible if you are subscribed to a telephone operator that provides this service. Contact your
telephone provider for more information.
8.1 New calls
8.2 Consulting the call list
A. Progress number
B. Date (DD-MM)*
C. Time (24h fomat)*
* Only when the network sends the time/date together with the telephone number! On some
networks with Caller ID, time and date will not be displayed.
“P” will appear when set to pulse dialling, “T” will appear when set to tone
(DTMF) dialling.
After 5 seconds, the unit returns to standby.
You can change the dial mode of the phone by accident when pressing the flash key
for 5 seconds in standby. The wrong dialling mode will cause that the number isn’t
dialled correctly or isn’t dialled at all.
When you receive a call, the numbers are saved in a call list. This list can
hold up to 20 telephone numbers (each of maximum 25 digits).
If the number is longer then 14 digits, you can scroll further to the right to
view the other digits.
When you have received a new unansw
ered call, the CLIP symbol will blink
on the display.
1 Press the call log key.
The last received call is displayed. If the list is empty, “NO CLIP” is shown.
The following will appear on the display:
After 5 seconds, the telephone number will be shown.
2 Press the right key to skip the date and time.
3 Press the left key to scroll to the previous call, press the right key to show
the next call.
4 Leave the call list by pressing the mute key.