Filter
Top Products
Topcom Twintalker 7000 9
Topcom Twintalker 7000
ENGLISH
12.9 Call Tones
A call tone alerts others that you want to talk.
a. Setting the Call Tone
10 different Call Tones can be selected.
• Press 3 times. CA will be displayed.
• Press or to select another call tone or select ‘0’ to enable call
tones.
• Press to confirm your selection and return to the standby mode.
b. Sending a call Tone
• Press briefly. The call tone will be transmitted for 3 seconds on the set channel.
12.10 Roger Beep On/Off
After the - button is released, the unit will send out a roger beep to confirm that you have
stopped talking.
To set the Roger Beep.
• Switch the unit off.
• Press and hold while turning on the unit by pressing and holding .
To switch the Roger Beep off, follow the same instructions.
12.11 iVOX Selection
The PMR is capable of voice activated (iVOX) transmission. In iVOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. iVOX
operation is not recommended If you plan to use your radio in a noisy or windy environment.
To activate iVox:
• Switch the unit off.
• Press and hold while turning on the unit by pressing and holding
.
• In the iVOX mode, the iVOX icon will be displayed.
• To switch iVox off, switch the unit off and on.
To change the iVox sensitivity.
• Press 4 times.
• Press or to select the sensitivity (1 = lowest sensitivity)
• Press to confirm your selection and return to the standby mode.
12.12 Auto power off
To save energy, you can activate the Automatic Power Off function. In case you forgot to
Power Off the unit, it will switch Off automatically after the set time.
• Press 5 times.
• Press or to select the auto power off time (30, 60 or 90 minutes)
• Press to confirm your selection and return to the standby mode.
PT
T
PT
T
PT
T
PT
T
PT
T