Filter
Top Products
18 Topcom Butler 4850/Twin/Triple/Quattro
Topcom Butler 4850Twin/Triple/Quattro
11.3 Outgoing Messages
Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
• Outgoing message 1 for the answering function and possibility for callers to leave a
message.
• Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine.
11.3.1 Recording outgoing messages (OGM 1 or OGM 2)
• Press the -key to select the OGM.
• The answering machine will playback the recorded OGM
• Press the -key for two seconds
• Record the outgoing message after the beep
• Press the Stop -key to stop recording.
11.3.2 Playback the Outgoing Message
To check the outgoing message now set:
• Press the -key.
11.3.3 Select outgoing message
• Press the -key to switch between the 2 outgoing messages.
– O1 = OGM 1
– O2 = OGM 2
• The internal voice will confirm the set outgoing message.
11.3.4 Erasing the Outgoing Message
Erase the outgoing message as follows:
• Select the desired outgoing message by pressing the -key.
• Press the key to play the outgoing message.
• Keep the key when the OGM is played back.
To stop playing the welcome note briefly press the Stop -key.
It is only possible to select an outgoing message if the answering machine
is turned on.
If the memory is full, only outgoing message 2 can be selected (only
answering without recording messages.