Filter
Top Products
10 Topcom Butler 4800/Twin/Triple/Quattro
Topcom Butler 4800Twin/Triple/Quattro
5.8 Paging
When you press the Paging button on the base unit, the handset emits a ringing signal for
20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a
handset.
5.9 Flash button (R)
When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 250 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
Press and hold the redial button for 3 sec. Æ The display will show:
‘Short’ for 100ms or ‘Long’ for 250ms Æ The flash time setting will disappear after 2 sec.
from the display
5.10 Setting the ring volume and melody
5.10.1 Handset melody
Press and hold the melody button until the current melody is heard. ÆSelect the desired
melody (1-9) by means of the scroll keys . Æ Press again to confirm the setting.
5.10.2 Handset ring volume
Press the volume button in standby. Æ The handset will ring in the current volume.Æ
Use the scroll keys to select the desired volume (0-5). Æ Press again to confirm
the setting.
5.10.3 Base melody
Press Menu button ÆUse the Right button to scroll to ‘BS MELODY’ and press OK
Æ Use the Right and Left key to select the melody (1-9) and press OK .
5.10.4 Base volume
Press Menu button ÆUse the Right button to scroll to ‘BS VOLUME’ and press OK
Æ Use the Right and Left key to select the melody (0-5) and press OK .
5.11 Key lock
When the keypad is locked, pressing any key will have no effect during standby (except
holding the key).
Press and hold the key. Æ appears on the display and the keypad is locked Æ Press
and hold the key again to un-lock the keypad.
You can turn the ringer volume of each individual handset ON or OFF by
simply press and hold the key in standby.