Filter
Top Products
Topcom Butler 3570/Twin/Triple/Quattro
24 Topcom Butler 3570/Twin/Triple/Quattro
11 TROUBLESHOOTING
12 TECHNICAL DATA
• Standard: DECT (Digital Enhanced Cordless
Telecommunications)
GAP (Generic Access Profile)
• Frequency range: 1880 MHZ to 1900 MHz
• Number of channels: 120 duplex channels
• Modulation: GFSK
• Speech coding: 32 kbit/s
• Emission power: 10 mW (average power per channel)
• Range: 300 m in open space /50 m maximum inhouse
• Numbr of handsets: Up to 5
• Powersupply base 230V / 50 Hz / 35 mA 6,5V DC 180mA & 150mA
• Handset Batteries: 2 rechargeable batteries AAA, NiMh 750mAh 1,2V
• Handset autonomy: 100 hours in standby
• Talk time: 10 hours
• Charging time: 6-8 hours
• Normal conditions of use: +5 °C to +45 °C
• Flash time 100 or 250 ms
Symptom Possible cause Solution
No display Batteries uncharged Check the position of the
batteries
Recharge the batteries
Handset turned OFF Turn ON the handset
No tone Telephone cord badly con-
nected
Check the telephone cord
connection
The line is occupied by
another handset
Wait until the other handset
hangs up
The icon flashes
Handset out of range Bring the handset closer to
the base
The base has no power
supply
Check the mains connec-
tion to the base
The handset is not regis-
tered on the base
Register the handset on
the base
Base or handset do not ring The ringing volume is zero
or low
Adjust the ringing volume
Not possible to transfer a
call on PABX
The FLASH time is too
short
Set the unit to Long Flash
time
Telephone does not react
to pressing the keys
Manipulation error Remove the batteries and
put them back in place