Filter
Top Products
10 Topcom Butler 2900C
Topcom Butler 2900C
5.3 OUTGOING CALLS
5.3.1 Making a phone call
• Press the Line button . You will hear the dial tone.
• Enter the desired telephone number.
• Press the Line button when you want to terminate the call.
5.3.2 Call setup with dial preparation
• Enter the desired telephone number. An incorrect number can be
corrected by means of the Mute button . When you haven’t
pressed a button for 10 seconds, the number you’ve already entered
will disappear and the handset returns to standby mode.
• Press the Line button . The number will be dialled automatically.
• Press the Line button when you want to terminate the call.
5.4 INCOMING CALLS
•When a call comes in, the handset will start to ring. The LED on
the base will blink.
• Press the Line button to answer the incoming call.
5.5 ACTIVATE/DEACTIVATE HANDS FREE FUNCTION
This function allows you to communicate without having to pick up the
handset. When you are on the phone, press the Hands free key to
activate the hands free function.
Press the same button to deactivate the hands free function.
Note : When you are calling in hands free mode and you want to
change the volume, press the Volume
button .
Attention !! When you use the hands free function for a long
time, the batteries will be empty more quickly !
5.6 PROGRAMMING MEMORY NUMBERS
You can program 10 indirect numbers (of max. 25 digits) in the phone’s
memory.
• Press and hold the Memory button until the -icon appears on the
display.
• Enter the telephone number you whish to store.
• Press the Memory button again to confirm.
• Enter the memory location (0-9) where you want to store the number.
• You will hear a confirmation tone and the -icon will disappear.
Remarks :
If you wish to insert a pause, press the Redial/Pause button
on the location where you want a pause of 3 sec.
/P
B2900_C.book Page 10 Friday, January 9, 2004 1:39 PM