Filter
Top Products
ENGLISH
29
Butler 2455
2929
MEMORY FULL-LED is turned on when the internal memory is full and no new messages can be
recorded.
8.2 Base Key Functions
Note: - The
&
keys are at the bottom of the base
Key Stand-by mode During message
Press key briefly press key for 2 seconds play-back
1 Play OGM Record OGM Go to previous message
2 Playback messages None Pause
3
None Record memo Skip message
Set volume None Set volume
4 speech +ringing
5 Select OGM Switch On-Off Stop
6 Play VIP-code Set VIP-code None
7 Current number of Set numbers of None
ring tones ring tones
8 Playback Time Set date/time None
9
None Delete all messages Delete message or
delete OGM
8.3 Outgoing Messages
Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
•Outgoing message 1 for the answering function and possibility for callers to leave a
message.
•Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine.
8.3.1 Recording outgoing messages (OGM 1 or OGM 2)
• Press the -key to select the OGM.
•Avoice will playback the recorded OGM
• Press the -key for two seconds
• Record the outgoing message after the beep
• Press the Stop
-
key to stop recording.
Note: The recording cannot exceed 2 minutes. If no outgoing message is recorded, the prerecorded
outgoing message is used.
8.3.2 Playback the Outgoing Message
To check the outgoing message now set:
• Press the key.
Note: To stop playing the welcome note briefly press the Stop -key .
1,2
1,2
1,2
HANDL. B2455_euro.qxd 27/2/03 9:01 pm Page 29