Topcom 2410 C Telephone User Manual


 
8
‘PIN’ appears on the display.
Enter the 4-digit PIN code of the base unit in (default PIN code is ‘0000’). Use the number
keypad.
Press the Programming key .
The handset is subscribed to the base unit.
4.3 Subscribing Butler 2405/2410 handset on another base (other brand/model)
Put the base in subscription mode (see manual of the base). If the base is in subscribing mode,
you have to do the following to subscribe the handset:
Press the Programming key .
Press the Up or Down key repeatedly until ‘BASE SUB’ appears on the display.
Press the Programming key .
‘BASE _‘ appears on the display.
Enter a number for the base unit to which you would like to subscribe the handset (1-4).
Use the number keypad.
‘SEARCHING’ and the symbol appear on the display.
The RFPI code (each base unit has a unique RFPI code) appears on the display and a signal
sounds once the base unit is found by the handset.
Press the Programming key .
‘PIN’ appears on the display.
Enter the 4-digit PIN code of the base unit (default PIN code is ‘1590’). Use the number keypad.
Press the Programming key .
The handset is subscribed to the base unit.
4.4 Making Calls
4.4.1 External Call
Press the Line key .
The Line/Charge indicator (LED) on the base unit will blink. ‘EXT’ and the Call symbol
appear on the display.
You will hear the dial tone. Dial the telephone number you wish to call.
The number appears on the display and is dialled.
After finishing your call, press the Line key to hang up or put the handset back on the
base unit.
4.4.2 Number preparation
Dial the telephone number you wish to call. You can correct the number by pressing the
Delete/Mute key .
Press the Line key .
The Line/Charge indicator (LED) on the base unit will blink. ‘EXT’ and the Call symbol
appear on the display.
The telephone number is dialled automatically.
•After finishing your call, press the Line key to hang up or put the handset back on the
base unit.
Butler 2410C
8888888888
HANDL. B2410_C.qxd 19/6/02 11:37 am Pagina 8