Filter
Top Products
Callmaster 220
11
ENGLISH
4. Operation
4.1 Setting the language
There are 3 display languages available. You can select the desired
language as follows:
1. Press and hold the Program/Call button and then press the
Record button. The display shows “RESET VXXX”.
2. Press the Program/Call button again. The display will show the
default language. To change the language, press the Record button
a few times until the right language appears.
3. Press the Program/Call button to confirm and to go to the next
setting ( see date and time setting).
Note: You can leave the program menu by pressing the Erase/Escape button Ø
4.2 Setting the Date and Time
When you have a subscription to the Caller ID service and your
telephone provider sends through the date and time together with the
telephone number, the clock will be set automatically.
It is also possible to set the clock manually:
1. Press and hold the Program/Call button and then press the
Record button . The display shows “ RESET VXXX”.
2. Press the Program/Call button twice. The display shows:
“DD/MM HH:MM”
3. Press the Up and Down buttons to change the setting.
4. Press the Record button to move the cursor.
5. Repeat steps 3 and 4 to enter all 8 digits.
6. Press the Program/Call button to confirm the date and time
settings.
Note: If you have entered a wrong date or time, the unit won’t leave the
date/time setting menu until you have set it correctly!
7. Press the Erase/Escape Ø button to leave the menu.
HANDL CALLM 220_SCAN 13/3/02 4:42 pm Page 11