Filter
Top Products
82
6 Symbol display ( ):
- this symbol means that the telephone has received calls that are automatically
stored in the Call List.
7 Symbol display ( ):
- this symbol means that the mute function is activated, the microphone is turned off
during a conversation.
8 Symbol display ( ):
- this symbol appears on the display when one makes or receives a call.
9 Symbol display ( ):
- this symbol means that the ringer is turned off. When one receives a call, the
telephone does not ring. The telephone will ring when one receives an internal call.
10 Symbol display ( ):
- this symbol is the battery indicator.
11 Symbol display ( ):
- this symbol means you are in the menu.
12 Symbol display ( ):
- this symbol appears when you browse the numbers in the Phonebook.
13 Symbol display ( ):
- this symbol appears when you have received a voice mail message (see chapter 6).
14 Symbol display ( ):
- this symbol means that the handsfree function is activated. You can now talk without
having to pick up the handset.
- this symbol blinks when the answering machine is activated (recording incoming
message,…)
15 Symbol display ( )
- this symbol means that the answering machine is activated or that you are in the menu
of the answering machine.
4 OPERATION
4.1 Tone/Pulse setting
The unit has been set to tone dialling mode (DTMF). If your system works on pulse dialling, you
can switch to pulse dialling (in most cases this is not necessary).
Take the following steps:
• Press the Programming key .
• Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.
• Press the Programming key .
• Press the Up or Down key repeatedly until ‘DIAL MODE’ appears on the display.
• Press the Programming key .
• The current status appears on the display:
-‘TONE’: Tone dialling for most of the telephone exchanges and phone lines
-‘PULSE’: Pulse dialling for old telephone exchanges that not operate on tone dialling
Butler 1250
B1250_NL_F_D_GB 25/3/02 3:09 pm Pagina 82