Filter
Top Products
Program Switch Details
Power Remote
Door Remote
1. Set the mini-jump in the JP1 position for door remote. Relay goes on for
4 seconds when buttons and are pressed.
2. Set the mini-jump in the JP2 position for power remote.
Press
buttons and to turn relay on.
Press button to turn relay off.
Note: The unit is set in the JP1 position (door remote) at the factory.
4.3 Testing
After: 1. wiring is completed
2. power is turned on and all system functions are checked,
then, testing for adjustment should be carried out. The plug for each station
should not be connected until the speech test is started.
26