Filter
Top Products
Changing your Radio’s Settings
18
Note: Your radio will only communicate with radios set to the same Channel
and Interference Eliminator Code.
Changing your Radio’s Settings
Setting the Channel
• Turn radio On.
• To set, press once the Channel display begins to flash.
• Then press or to choose the Channel.
• Press to exit this menu.
Note: The red indicator light above the display flashes every
second when the Channel is in use.
Setting the Interference Eliminator Code
The Interference Eliminator Code helps minimize
interference by providing you with a choice of code
combinations.
• Turn radio On.
• To set, press twice the Code display begins to flash.
• Then press or to choose the Code.
• Press to exit this menu.
Note: To hear everyone on your Channel, or to communicate with a radio
that does not have Interference Eliminator Codes, select Interference
Eliminator Code
.