Telular SX6P GSM Telephone User Manual


 
Phonecell
®
SX6P GSM 6 User Manual
LCD Screen Icons
Icons displayed on the LCD screen indicate the features in use, the status of the phone, signal
strength and battery status - see Figure 13.
Service Indication
Full Service
When powered on, the SX6P will display a wakeup banner (the 300G models LCD screen and
keypad backlight will also light). After a few seconds, the greeting and mobile carrier will display.
If service is available, the antenna icon will display indicator bars. The number and height of the
indicator bars increases as the signal grows stronger (the more bars, the better the signal).
No Service
When no service is available, the antenna icon will not display any bars. Contact your service
provider to verify cellular service is activated. No calls can be made in this condition.
Limited Service
If there is a signal, but full service with the system is blocked, only emergency calls will be
allowed. Contact your service provider for more information.
Network Registration
If the home network is unavailable, but there is another network available (either another fre-
quency or system), the SX6P will attempt to register to that system. If there is more than one
system, a list of available systems will display.
1. Use the arrow keys to highlight a network from the list.
2. Press the SELECT key. If the selected network cannot be accessed, the list of available net-
works will be updated and a different network must be selected.
Figure 13 – SX6P LCD screen icons.
Received Signal
Strength - Indicates the
strength of the current
signal. The more bars,
the stronger the signal.
Message - Displays when
a new text or voicemail
message has been received.
Speaker - Indicates speaker
phone is activated.
Battery - Indicates the level of
battery power. The more bars,
the more power.
Clock - Displays the
current time.
LCD Soft Key Labels - Provide access to features within
the sub-menus of the SX6P. Labels change according to
the selected sub-menu.
Alarm - Indicates that
the alarm feature has
been set.
Call - Indicates that the hand-
set is off-hook.