Filter
Top Products
44 45
5. Use
.LWW^
or to display the handset number you wish to de-register, then press
8PY`
.
6. Deregister? will be displayed, press
8PY`
again to confirm.
Restore default settings
You can reset your Telstra 7300/7300a handset to its default (original) settings.
1. Press
8PY`
to open the main menu.
2. Press
.LWW^
or until the display shows Setup h/set and press
8PY`
.
3. Press
.LWW^
or until Reset is displayed and press
8PY`
.
4. Reset? is displayed. Press
8PY`
. Saved is displayed.
Language
You can change the default language used by your Telstra 7300/7300a from English to German or
Turkish.
1. Press
8PY`
to open the main menu.
2. Press
.LWW^
or until the display shows Setup h/set and press
8PY`
.
3. Press
.LWW^
or until Language is displayed and press
8PY`
.
4. Scroll
.LWW^
or to choose the default language and press
8PY`
to confirm.
5. Press and hold
8`_P
to return to standby.
Handset settingsHandset settings
Registering handsets
If you have purchased a Telstra 7300/7300a multi handset pack, the handsets in these packs are
already pre-registered to the main base.
If however you de-register a handset and need to re-register it back to a Telstra 7300/7300a base at
any stage:
1. Press
8PY`
and enter
using the keypad.
2. Registration is displayed, press
8PY`
.
3. Register is displayed, press
8PY`
and Enter PIN will be displayed.
4. Enter the base PIN (original setting 0000) and press
8PY`
.
5. The handset will display Searching, press and hold the
;LRP
button on the base until you receive a
confirmation tone.
6. The handset will temporarily display Registered then will display Handset and will be
automatically assigned the next handset number.
Your Telstra 7300/7300a is not GAP compatible and registration is therefore generally limited to other Telstra 7300/7300a
handsets. The Registration and De-registration menu’s are therefore “hidden” and can only be accessed after entering the
code
De-registering a handset
You can de-register any handset from a base using any of the handsets that are registered to it.
1. Press
8PY`
and enter
using the keypad.
2. Registration is displayed, press
8PY`
.
3. Press
.LWW^
or until Deregister is displayed, press
8PY`
and Enter PIN will be displayed.
4. Enter the base PIN (original setting 0000) and press
8PY`
.