Telex BTR-300 Intercom System User Manual


 
-34-
CUSTOMER SERVICE INFORMATION
If your receiver or transmitter should need servicing under the warranty, please contact:
Customer Service Department
TELEX COMMUNICATIONS, INC.
8601 East Cornhusker Highway,
P.O. Box 5579,
Lincoln, Nebraska 68505-5579 U.S.A.
Phone: (402) 467-5321 or 465-7021
All claims of defect or shortage should be sent to the above address. When returning items
for service, you must provide date and proof of purchase, such as a copy of the sales re-
ceipt, to establish warranty. A letter should be included outlining all symptoms and claimed
defects. Information on how the equipment was installed and used is very helpful. Please
include your phone number and return address in case our service technicians need to con-
tact you.
Units that have been modified cannot be accepted for repair.
Include all information requested by the Service Department. Then pack the unit as fol-
lows:
Check the unit to see that all parts and screws are in place. Then wrap it in heavy paper or
put it in a plastic bag. If the original carton is not available, place the unit in a strong carton
that is at least six inches bigger in all three dimensions than the unit. Fill the carton equally
around the unit with resilient packing material (shredded paper, foam, etc.). Seal it with
gummed paper tape, tie it with a strong cord, and ship it by prepaid express, United Parcel
Service or insured parcel post to the Telex Service Department.
It is very important that the shipment be well-packed and fully insured. Damage claims
must be settled between you and the carrier and this can delay repair and return of the unit
to you.
Telex reserves the right to make changes in design and improvement on its product without
assuming any obligation to install the same on any of its products previously manufac-
tured. Further Telex reserves the right to ship new and/or improved products which are
similar to the form, fit and function of products originally ordered.