Filter
Top Products
MUTE
(SPEAKERPHONE-EQUIPPED MODELS ONLY)
1) To mute a call, press the MUTE key. The red MUTE LED will light. You will continue
to be able to hear the other party, but they will not be able to hear you
2) Press the MUTE key again to turn off the mute feature. The MUTE LED will go out.
REDIAL
To redial the last telephone number dialed:
1) Lift the handset from the cradle, or press the SPEAKERPHONE key.
2) Press the REDIAL key. The last number dialed will be redialed.
ADJUSTING THE HANDSET VOLUME
To the left of the dialpad, locate the volume up/down arrow keys. While using the handset,
either during an active call, or preparing to dial, press either the up or down key to raise or
lower handset volume to the desired level.
PROGRAMMING THE AUTO DIAL KEYS
Depending on your iPhone model, there may be programmable guest service keys located
above the dialpad. These keys can be used for one-touch access to commonly dialed num-
bers or services. To program these auto-dial keys, the telephone must be connected to an
active telephone line.
Programming of these keys is protected from unauthorized tampering, and employs the use
of “hidden” programming keys located underneath the faceplate. With the clear plastic
overlay and faceplate removed from the phone, locate the STORE key as noted in the
phone diagram. This recessed key is located above number ‘3’ in the dialpad.
To program an auto-dial, or guest service, key:
1) Lift the handset from the cradle, or press the
SPEAKERPHONE key.
2) Press the recessed STORE key and release it.
3) Enter the number or extension to be programmed.
4) Press the auto-dial key where the number is to be stored.
5) Repeat this procedure as necessary for additional
auto dial keys.
6) Place the handset back in the cradle, or press the
SPEAKERPHONE key to disconnect.
PAUSE KEY
The PAUSE key can be used to provide a timed pause between dialed digits within a stored
auto dial number. The timing of the pause is programmable, with the factory default set to
one (1) second. To change the pause timing:
1) Lift the handset or press the SPEAKERPHONE key (speakerphone-equipped models.)
2) Press the STORE key (see diagram on inside front cover for key location.)
3) Press the PAUSE key (see diagram for key location.)
3
1
4
7
2
5
8
0
3
6
9
#
‘PAUSE’ KEY ‘STORE’ KEY