Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURYTO
PERSONS. INCLUDING THE FOLLOWING:
1. READ AND UNDERSTAND ALL INSTRUCTIONS.
2. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT.
3. UNPLUG THE PRODUCT FROM THE WALLOUTLET BEFORE CLEANING. DO NOT USE LI
UID CLEANER OR AEROSOL CLEANERS. USE ADAMP CLOTH FOR CLEANING.
4. DO NOT USE THIS PRODUCTNEAR WATER FOR EXAMPLE NEAR ABATHTUB, WASH
BOWL, KITCHEN SINK OR LAUNDRYTUB, IN A WETBASEMENT, OR NEAR ASWIMMING
POOL.
5. DO NOT PLACE THIS PRODUCTON AN UNSTABLE CART, STAND OR TABLE. THE PROD-
UCT MAY FALL, CAUSING SERIOUS DAMAGE TO THE PRODUCT.
6. SLOTS AND OPENINGS IN THE CABINETAND THE BACK OF BOTTOM ARE PROVIDED
FOR VENTILATION, TO PROTECTIT FROM OVERHEATING, THESE OPENINGS MUST
NOT BE BLOCKED OR COVERED. THE OPENINGS SHOULD NEVER BE BLOCKED BY
PLACING THE PRODUCT ON THE BED, SOFA, RUG OR ANY OTHER SIMILAR SURFACE.
THIS PRODUCT SHOULD NEVER BE PLACED NEAR OR OVER ARADIATOR OR HEAT
REGISTER. THIS PRODUCT SHOULD NOTBE PLACED IN A BUILT-IN INSTALLATION
UNLESS PROPER VENTILATION IS PROVIDED.
7. NEVER PUSH OBJECTS OF ANY KIND INTO THIS PRODUCTTHROUGH CABINET SLOTS
AS THEY MAYTOUCH DANGEROUS VOLTAGE POINTS OR SHORT OUT PARTS THAT
COULD RESULT IN ARISK OF FIRE OR ELECTRIC SHOCK. NEVER SPILL LIQUID OF ANY
KIND ON THE PRODUCT.
8. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOTDISASSEMBLE THIS PRODUCT
BUT TAKE ITTO AQUALIFIED SERVICEMEN WHEN SOME SERVICE OR REPAIR WORK IS
REQUIRED. OPENING OR REMOVING COVERS MAY EXPOSE YOU TO DANGEROUS
VOLTAGES OR OTHER RISKS. INCORRECT REASSEMBLE CAN CAUSE ELECTRIC
SHOCK WHEN THE APPLIANCE IS SUBSEQUENTLY USED.
9. UNPLUG THIS PRODUCT FROM THE WALLOUTLETAND REFER SERVICING TO QUAL
FIED SERVICE PERSONNELUNDER THE FOLLOWING CONDITIONS.
· WHEN THE POWER SUPPLY CORD OR PLUG IS DAMAGED OR FRAYED
· IF LIQUID HAS BEEN SPILLED INTO THE PRODUCT.
· IF THE PRODUCT HAS BEEN EXPOSED TO RAIN OR WATER.
· IF THE PRODUCT DOES NOT OPERATE NORMALLYBY FOLLOWING THE OPERATING
INSTRUCTIONS. ADJUST ONLY THOSE CONTROLS THATARE COVERED BY THE
OPERATING INSTRUCTIONS BECAUSE IMPROPER ADJUSTMENT OF OTHER CON-
TROLS MAY RESULT IN DAMAGE AND WILLOFTEN REQUIRE EXTENSIVE WORK BYA
QUALIFIED TECHNICIAN TO RESTORE THE PRODUCT TO NORMAL OPERATION.
· IF THE PRODUCT HAS BEEN DROPPED OR THE CABINET HAS BEEN DAMAGED.
· IF THE PRODUCT EXHIBITADISTINCTCHANGE IN PERFORMANCE.
10. AVOID USING ATELEPHONE (OTHER THAN A CORDLESS TYPE) DURING AN ELECTRI-
CAL STORM. THERE MAY BE AREMOTE RISK OF ELECTRIC SHOCK FROM LIGHTING.
11. DO NOTUSE THE TELEPHONE TO REPORTAGAS LEAK IN THE VICINITY OF THE LEAK.
SAVE THESE INSTRUCTIONS
FOR CUSTOMER SERVICE CALL
1-800-783-8353
Teledex, LLC
6311 San Ignacio Avenue
San Jose, CA
95119
Telephone: (408) 363-3100
Fax: (408) 363-3136
email: sales@teledex.com
Internet: www.teledex.com
Part Number 606-2660-00A
TELEDEX
OPAL 1010S
DI
AGRAM
RING
VOLUME
Adjusts the ringer volume
to Low or High setting.
DATA PORT
HANDSET VOLUME KEY
Changes handset volume by
pressing repeatedly.
REDIAL KEY
To automatically redia
l
last number dialed
AUTO DIAL
KEYS 6-10
For easy, one-touch dialing of guest
services or
PBX features. Programmed during
installation.
AUTO DIAL KEYS 1-5
For easy, one-touch dialing of guest services or
PBX features. Programmed during installation.
MESSAGE WAITING LIGHT
Signals that a message is waiting for retrieval.
See your system administrator for instructions
on retrieving messages.
HOLD KEY
STORE KEY (hidden
)
Used in programming
of number sequences.
See instructions for
programming details.
HANDSET HOLDER
Used to temporarily hold the handset,
without hanging up the telephone,
when telephone is wall mounted.
HEARING AID COMPATIBLE HANDSET
HANDSET JACK
Modular jack for connecting handset to base.
DIAL KEYS (DTMF
PAD)
For dialing phone
numbers,and entering
numbers to be stored
in auto dial keys.
FLASH KEY (hidden)
For programming of FLASH duration.
SPEAKERPHONE KEY
MUTE KEY