Filter
Top Products
8
PDT 8100 Series
with Windows Mobile
2003 for Pocket PCs
Charging the Battery
Charging the Main Battery and Memory Backup Battery for
the First Time
Before using your terminal for the first time, charge the lithium-ion battery
in the terminal for a minimum of 12 hours, with the terminal off. Charge the
battery using the Serial/Charging Cable or the appropriate cradle. This is
the time needed to fully charge the main battery and the internal backup
battery in a terminal that is off.
Recharging the Main Battery
To recharge the 1950 mAh lithium-ion battery in the terminal, turn the
terminal off and charge the battery for approximately 2 1/2 hours using the
Serial/Charging Cable or the appropriate cradle.
Note: The battery can also be recharged separately in the CRD
8100-1200S Single Slot Charging Cradle, VCD 8100-R001
Vehicle Charging Cradle, or UBC battery adapter.
Charging the Battery Using a Cradle
Charge the battery in the terminal using the CHS 8100-4000C Four Slot
Charge Cradle, CRD 8100-1200M Single Slot Modem Cradle, VCD 8100-
R001 Vehicle Charging Cradle, CRD 8100-1200S Single Slot Charging
Cradle, or CRD 8100-4000E Four Slot Ethernet Cradle. For more
information, refer to the set up instructions in the respective Quick
Reference Guides.
6598801a.fm Page 8 Monday, December 8, 2003 2:01 PM