Filter
Top Products
9. P(Pause) button
Storing a
1
Number in
2
M1,M2,M3
one-touch
Dial out
Stored
Ö
Lift up Handset, press M1,M2,M3 buttons.
number
3
2
3
3
2
Press MEM and then the 0-9 button to
Replace the Handset on the Base unit cradle.
memories
Storing a
Number in
(0-9)
two-touch
memor
ies
1
2
3
selected memory.
Connection and conditions for use
You can connect your Spirit 110 phone to a direct exchange line (DEL)
Spirit 110 phone as an
The ringer equivalence numbers (RENs) of all instruments (phones, fax
machines, etc.) connected to an exchange line must not add up to more
- otherwise, one or more of them may not ring and/or answer calls
The Spirit 110 phone has a REN of 1, and most other telephones have
Contents of this User Guide
UK Argos(VALUE) Ver4 .0
05-Nov,2009
store the number in the
4. Guarantee and service
This product is guaranteed against manufacturing defects for a period of 1
This does not cover the product where the fault is due to misuse, abuse,
use in contravention of the instructions, or where the product has been
In the event of a problem with the product within the guarantee period
please return it to your nearest Argos store.
If the item is shown to have had an inherent defect present at the time of
Your statutory rights remain unaffected.
Guarantor; Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Year.
subject of commercial use.
the subject of unauthorised modifications or alterations, or has been the
sale, the store will provide you with a replacement.
Standard Spirit 110 Telephone
Temperature range Operating 0 ºC to 40 ºC
Storage -20 ºC to 60 ºC
PBX compatibility Timed break recall: 100 ms. Pause length: 3.6
Signalling type: DTMF (dual-tone multifrequency)
Network connection This equipment is intended to be used in the UK
Operation on other countries’ PSTN termination
.
5. Technical details
seconds.
also called tone dialing.
points cannot be guaranteed
only.
than 4
correctly.
- a line connected to a local exchange, with its own phone number;
an extension socket connected to a DEL; or to an extension on an
approved compatible PBX. Do not connect the
extension to a pay phone.
to
a REN of 1 unless marked otherwise.
1. Where to find it
2. Installation
3.
Telephone operation
4.
5.
Pressing buttons on your phone
When the instructions in this user guide tell you simply to ‘press ’ a
button, this means that you should press the button briefly, then
.
When the instructions tell you to ‘press and hold’ a button, this
keep the button pressed until the display changes
Guarantee and service
Technical details
release it
means you should
and / or you hear a tone.
Pd Y^Va V cjbWZg hidgZY ^c Pld1idjX] bZbdgn .41=/
C
C
C
Ö
The number dials automatically.
Dial out
Stored
number
1
2
(0-9)
two-touch
memories
Lift up the handset.
w:-;; <0-
`Y`bdj
*=<<76Ztmt[
r
-A 16 <0- 5-57:A 47+~<176 6=5*-: Z_]h[
Lift up Handset, press STO (store) button
.
Ö If you try to store more than 16 digits,
only the first 16 digits will be saved.
Press M1,M2 or M3 button to store the
Key in the telephone number you wish to
Lift up Handset, press STO (store) button
.
Key in the telephone number you wish to
number in the selected memory.
Up to a maximum 16 digits.
Ö
Up to a maximum 16 digits.
Ö
store.
store.
The number dials automatically.
Wasteelectricalproductsmustnot
bedisposedof withhouseholdwaste.
Thisequipmentshould betakento
yourlocalrecycling centreforsafe
treatment.
EC Declaration of Conformity
We the manufacturer / Importer : Binatone Telecom Plc
1 Apsley Way London
NW2 7HF, United Kingdom.
Declare under our sole responsibility that the following product
Type of equipment:
Corded Phone
Model Name:
Spirit 1
1
0
Country of Origin:
China
Brand:
V
Value
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the
approximation of the laws of the Council Directive 2004/108/EC on the approximation of
the laws of the Member States relating to electromagnetic compatibility (EMC) and the
European Community Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the essential
requirements according to Article 3 R&TTE was based on Annex III of the Directive
1999/5/EC and the following standard:
EMC:
Electrical Safety:
The product is labelled with the European Approval Marking CE as show. Any Unauthorized
modification of the product voids this Declaration.
Manufacturer / Importer
(signature of authorized person)
London,
Signature: Place & Date: 18th Sep, 2009
EN55022:2006
EN55024:1998 + A1+A2
EN 60950-1:2001+A11 : 2004