SpectraLink PTB400 Telephone User Manual


 
SpectraLink Corporation Link Wireless Telephones and Accessories User Guide
Overview
Your Link Wireless Telephone is a state of the art communication
device that utilizes radio wave technology to send and receive voice
transmissions. It is designed to operate like the familiar cell phone.
However, the Wireless Telephone utilizes the private telephone
system installed in your facility and will not operate outside the area
reached by this system.
The following guide is meant to provide general information about
your Wireless Telephone. Contact your system administrator for
additional information on how your Wireless Telephone functions
within your telephone system.
Registered model numbers
This document covers registered model number:
PTB400
Customer support hotline
SpectraLink wants you to have a successful installation. If you have
questions please contact our Customer Support Hotline at (800)
775-5330. The Hotline is open Monday through Friday, 6:00 a.m. to
6:00 p.m. Mountain Time.
Status Indicators
NO SVC
The Wireless Telephone cannot receive or place calls. You may be
outside of the coverage area. Walk back into the covered area.
BATT
Your Battery Pack charge is low. You will also hear a beep in the
earpiece. Your Battery Pack needs to be recharged.
MSG
You have a voicemail message.
Quick Start Guide
Power on
Press and hold PWR until double chirp, then
release
Power off
Press and hold PWR until single chirp, then
release
Answer call
Press START
Hang up
Press END
Place call
Press START, dial number
Select line
Press START then press LINE , then select line
number (
1-9)
Adjust volume during call
Press VOL while you are talking to toggle
between base volume level and a louder volume
level
Put call on hold
Press HOLD
Mute/Unmute microphone
Press FCN then 1
Part Number: 72-0035-51-I.doc Page 6