16
Getting Started
Answer a call on a
second line
If you are on a call and hear subdued
ringing, a call is coming in on a second
line. The line number on the display may
be flashing. To answer this call, put your
first call on hold and press the
LINE key,
then the line number of the second call.
Answer with headset Press any key (other than
END) to answer
a call when a headset is plugged in.
Silence while ringing Press the
END key to silence the ring.
Change the
ring volume
Press the up/down volume buttons on
the side of the handset during ringing.
The default ring volumes are set in the
User Profile menus.
Adjust the
speaker volume
Press the up/down volume buttons on
the side of the handset during the call.
Adjust the
headset volume
Press the up/down volume buttons on
the side of the handset during the call.
Place a call on hold Press the
Hold softkey.
Resume a held call Press the
LINE key followed by the line
number key.
Mute the microphone Press the
Mute softkey.
End the call Press the
END key. Be sure to do this at
the end of each call to return to the
standby mode.
If you want to Then