Filter
Top Products
SpectraLink Corporation NetLink e340 Wireless Telephone User Guide
Part Number: 72-1001-01-B.doc Page 12
Setting User Preferences
When the Wireless Telephone is in standby mode (on but
not in use), press and briefly hold FCN to display user
options. Check with your system administrator for specific
features supported by your Wireless Telephone.
► (Right arrow)
displays next menu item.
◄ (Left arrow)
displays previous menu item.
0 (Zero)
selects or changes item.
FCN
returns to previous menu level.
Power Off/End Call
exits menus
User Option Menu Action:
Ring Type
Select Telephone Ring to set the
standard ring on the Wireless
Telephone.
Normal: is the factory default ring.
Vib/Norm ring: vibrates for five
seconds and then rings.
Vibrator ring: vibrates for a non-
audible call alert.
Press 0 to select
desired ring type. The
ring type currently set
displays with an
asterisk.
High Noise Mode
Adjusts the Wireless Telephone to
account for background noise.
Normal: for most office
environments
High: for moderate background
noise
Severe: for extremely noisy
conditions.
Select an option that
describes the noise in
your environment.
Current IP address
In IP systems, the IP address of the
Wireless Telephone is displayed.
This number may not be edited.
None
Extension
Sets the extension number
associated with your Wireless
Telephone. This number is used to
identify the Wireless Telephone
and is for display purposes only.
Use keypad to enter
extension number.
(Additional options may be present. Contact your system administrator for information.)