Filter
Top Products
16
- END OF LIST -
CALL#
00
2. After 20 seconds with no activity, the
display will default to the Stand-By
screen and remain on until another call
is received or a button is pressed. This
will show you the total number of calls
stored and how many new calls that
have not been reviewed.
REVIEWING CALLS
1. When the NEW symbol is flashing on
the Stand-By screen, you have new
incoming calls. Next to the NEW symbol
is the total number of new calls. Press
the REVIEW UP (
) and REVIEW DOWN
(
) buttons to review the incoming
stored calls.
2. The NEW symbol attached to each call
will be removed after you review the
call.
3. If the NEW symbol is still flashing when
the display goes back to the Stand-By
screen, there are new calls that you
have not yet reviewed.
4. The reviewed number can be stored
into any of the auto memory buttons or
keypad memory locations by pressing
the STORE button first, then one of the
memory buttons.
5. When you have reached the end of the
call records, the display will indicate
“-END OF LIST-”,
confirming there are
no more calls stored.
NOTE: If the telephone number received is
more than 10 digits, the unit will only store
the last 10 digits into memory.
TOTAL CALLS 06
8:59 8/24
PM
NEW
05
New symbol
Total
New Calls