Sony SPP-IM977 Cordless Telephone User Manual


 
Getting Started
18
US
5 Enter three digits of your home area code using the dialing keys.
6 Press (PGM).
You will hear a long confirmation beep.
Notes
If the home area code is already entered, it appears on the display in step 4. To enter a
different home area code, see “To change the home area code” below.
Do not allow more than 20 seconds to elapse between each step of the procedure.
Tips
You may press Jog Dial instead of (PGM) in step 6.
To check the current home area code, perform steps 1 to 4. The home area code appears on the
display for about 20 seconds.
To change the home area code
1 Perform steps 1 to 4 on page 17.
The current home area code appears on the display.
2 Turn Jog Dial down to erase the current home area code.
3 Enter a new home area code using the dialing keys.
4 Press (PGM).
You will hear a long confirmation beep.
To enter the local area code (For 10 digits phone
numbers users)
If a call matches one of the local area codes you entered, the phone number will be
registered with 10 digits in the Caller ID list (area code + number). If a call does not
match one of the local area codes you entered, the phone number will be registered
with 11 digits in the Caller ID list (1 + area code + number). Some regions of the
country allow you to have more than one local area code. (Up to five local area codes
can be entered in this phone.)
1 Perform steps 1 to 3 on page 17.
2 Turn Jog Dial up to make ”LOCAL“ flash.
3 Press Jog Dial.
HOME LOCAL
#1 #2 #3 #4 #5
Step 4: Entering the area code (continued)