Filter
Top Products
Basics
22
US
Making calls (continued)
(VOLUME)
SPEAKERPHONE lamp
(SPEAKERPHONE)
Making calls through the speakerphone
Press (SPEAKERPHONE) on the base
phone.
“SPEAKERPHONE” appears on the
display and the display also shows the
operation duration in hours, minutes and
seconds.
The SPEAKERPHONE lamp lights up.
Dial the phone number.
To adjust the speaker volume, press
(VOLUME)(+) or (--). Each press of
(VOLUME)(+) or (--) switches the speaker
volume by one of 8 levels.
When you’re done talking, press
(SPEAKERPHONE) again.
Notes
• While conversing with an outside caller via the handset, the display on the
base phone shows “HANDSET IN USE” and you cannot make a call
through the speakerphone. If you press (SPEAKERPHONE), you will hear a
busy tone.
• When the operation duration exceeds 9:59’59, the display counts from 0:00’00
again.
To obtain the best speakerphone performance
• You may not be able to hear the other party’s voice in a noisy place.
Therefore, use the speakerphone in a quiet room.
• Do not bring your hand or other object too close to the microphone
or you will hear a shrill noise (“feedback”).
• When the speaker volume is loud, or the base phone has been placed
close to a wall, you may find that the volume drops suddenly. This
is due to a circuit in the telephone designed to protect against
feedback. In such cases, lower the speaker volume slightly.