Filter
Top Products
Getting Started
25
US
Getting Started
The phone system includes a cordless handset. You can expand the
system including a total of four cordless handsets. Be sure to register
the ID number of the additional cordless handset called “station
number” to the base phone before using the additional cordless
handset. The station number of the base phone is set to 0 and that of
the cordless handset (supplied with the base phone) is set to 1 at the
factory. The station number of the cordless handset newly added to the
system will be one of the number 2 through 4 in the order of
registration.
Before you start registering, set all the unit of the system in standby
mode and place them close to each other (within a distance of 12
inches). Then do the following procedure only on the additional
cordless handsets one bye one.
Caution
Do not register two or three cordless handsets at the same time.
Doing so may result in more than one cordless handsets having an
identical station number.
1 Press (PGM).
2 Press (INTERCOM).
You hear a confirmation beep.
RING OFFMASSAGEOLDNEW
ENTER SYSTEM ID
_
within 12 inches
Base phone cordless handset
continued
Registering additional cordless handsets