Filter
Top Products
56
US
Caller ID Features
Notes
• If the area code is not entered, “ENTER AREA CODE” will appear on the
display, and you will not be able to store into the Phone Directory. Enter the
area code (see page 17).
• Do not allow more than 60 seconds to elapse during the operation procedure.
• If the number displayed in step 1 is not the one you should store, you can
change the number of digits of the phone number as described below.
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
Tip
When you select “(GO BACK)”, you can return to the previous set display by
pressing Jog Dial.
To change the number of digits of the phone
number
If the number of digits of the phone number in the Caller ID list is
different from the actual phone number, you need to adjust the
number of digits of the phone number to call back or store into the
Phone Directory.
1 While the phone number from the Caller ID list is displayed,
press (#) repeatedly until the phone number with the
correct number of digits appears on the display.
Each time you press (#), the number of digits changes as
follows:
When the home area code and the local area code do
not match
SMITH JOHN
1-201-123-4567
01 7.04 4:53PM
RING OFF
MASSAGEOLDNEW
SMITH JOHN
201-123-4567
01 7.04 4:53PM
RING OFF
MASSAGEOLDNEW
SMITH JOHN
123-4567
01 7.04 4:53PM
RING OFF
MASSAGEOLDNEW
SMITH JOHN
1-123-4567
01 7.04 4:53PM
RING OFF
MASSAGEOLDNEW
Using the Caller ID list (continued)