Sony MEX-BT3700U Bluetooth Headset User Manual


 
9
J SEEK +/– buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
Bluetooth audio device*
2
:
To skip tracks (press).
K (front panel release) button page 7
L BT (BLUETOOTH) button page 16
For Bluetooth signal on/off, pairing.
M Receptor for the card remote
commander
N ZAP button page 12
To enter ZAPPIN™ mode.
O BTM/CAT*
3
button page 12
To start the BTM function (press and hold).
P Number buttons
CD/USB:
(1)/(2): ALBM –/+ (during MP3/WMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
(3): REP page 13, 14, 15
(4): SHUF page 13, 14, 15
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Bluetooth audio device*
2
:
(6): PAUSE
To pause playback. To cancel, press
again.
Bluetooth phone:
(5): MIC page 18
Q DSPL (display)/SCRL (scroll) button
page 13, 14, 15, 16
To change display items (press); scroll the
display item (press and hold).
R AUX input jack page 21
To connect a portable audio device.
S RESET button page 6
T Microphone page 18
Note
Do not cover the microphone, the handsfree
function may not work properly.
*1 In the case of a CD changer, HD Radio tuner or
SAT tuner being connected; when (SOURCE) is
pressed, the connected device (“HD,” “XM” or “SR”)
will appear in the display, depending on which
device is connected. Furthermore, if (MODE) is
pressed, you can switch the changer, HD Radio
tuner band or SAT tuner band.
*2 When a Bluetooth audio device (supports AVRCP
of Bluetooth technology) is connected. Depending
on the device, certain operations may not be
available.
*3 When the SAT tuner is connected.
Notes
When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.