Shure 512 Wireless Office Headset User Manual


 
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
Polarity
Positive voltage on cable conductor produces positive pres-
sure.
Output Level (at 1,000 Hz)
94 dB SPL at ear with 1 mW input
Internal Connections
RED
CODED
TERMINAL
BLACK
CODED
TERMINAL
CODED
TERMINAL
SHIELD
RED
BLACK
MICROPHONE
SHIELD
WHITE
RECEIVER
SLEEVE
TIP
1
2
3
MATERIAL
Cable
2.1 m (7 ft.) attached cables: one 2-conductor shielded with
black 3-pin XLR connector (microphone) and one single-con-
ductor shielded with 2-circuit phone plug (headphones).
Headset
Stainless steel and thermoplastic with foam earpads.
Dimensions
12.7 mm
(1/2 in.)
52 mm
(2 in.)
12 mm
(15/32 in.)
14 mm
(9/16 in.)
15.9 mm
(5/8 in.)
203 mm
(8 in.)
MAX 180 mm MIN 130 mm
(7 – 3/32 in. — 5 – 1/8 in.)
Net Weight
186 grams (6.5 oz.) including connectors
USING THE MICROPHONE
Snap the microphone boom into the rotating holder below the left
earpiece. Put on the headset and adjust the earpads to the most
comfortable position. The headset is designed for use with the mi-
crophone mounted on the left side. Slide and twist the microphone
boom and rotate its holder until the microphone is located as close
as possible to the left corner of the mouth (not directly in front).
REPLACEMENT PARTS
Microphone Cartridge . . . . . . . . . . . . . . . . . . . . . .R93
Headphone Cartridge . . . . . . . . . . . . . . . . . . . . . .90FA2600
Pop Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90RX1371
Foam Earpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49A78A