Filter
Top Products
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-3
This Document can not be used without Samsung's authorization
1) Be careful of damaging FPCB.
2) Lift up the SLIDE HINGE before you separate LOWER.
1) Be careful of damaging the SPK and MOTOR.
1) Be careful of damaging the LCD GLASS.
1) Remove the SPK and MOTOR
2) Seperate the KEYPAD from UPPER
1) Seperate the LOWER from1~4.
9
10
11
12
3
4
2
1
1) After remove the
bonding, separate the
SPK and MOTOR.
1) Solder and seperate the FPCB from the PBA.
2) Remove the TAPE.
2) Remove the FPCB.