Sharp El- 6890 PDAs & Smartphones User Manual


 
29
The Backlight is nullified during data transfer. (When the
Backlight is turned on, it is automatically turned off at the
beginning of data transfer.)
When the Organizers are not in the same mode before
transferring data by entry or mode, “DATA ERROR !” is
displayed and no data transfer is allowed.
However, directories in the TEL (or E-MAIL) and WWW
mode are excluded from this rule. For example, data in the
TEL/MAIL1 directory can be transferred to the WWW
directory.
When the communication cable is disconnected during
data transfer, “I/O DEVICE ERROR !” is displayed. Press
C•CE
to clear the error, check that the Organizers are
connected correctly, and then start the steps again.
The indication “Replace the OPERATING batteries !”
shown when
2nd
OPTION
are pressed means that the
operating batteries are almost exhausted. Replace them
with new ones then try again to transfer data.
When “MEMORY FULL” is displayed and data transfer is
aborted, delete unnecessary data on the receiving
Organizer, then start the steps from the beginning.
Using the Option Function
You can share the specific data, the data in the specific mode,
or the whole data (for the purpose of making a backup copy
or restoring the data) by transferring it to/from another
EL-6850/6890/6890S.
Backup data transfer is only possible between identical
models.
Communicating with another EL-6850/6890/6890S
requires the optional cable “CE-260L”.
1.Cautions and Special Notes for Data Transfer
Turn off the secret function before transferring data by
mode. If the secret function is turned on, data cannot be
transferred by mode.
After data transfer, the data on the transfering Organizer is
preserved.
Alarm setting is ignored. The alarm will not sound during
data transfer.
The Auto power off function is disabled in all the transfer
modes.