Filter
Top Products
0 1 2 3 4 5 6 7 8 9 . , 0 1 2 3 4 5 6 7 8 9 . ,
0 1 2 3 4 5 6 7 8 9 . , 0 1 2 3 4 5 6 7 8 9 . ,
0123456789 0123456789
1. Setting a currency rate
1. Press
CALC/CONV
several times to
display the currency
conversion mode
screen (refer to “Calculator mode”).
Example:
1 CAD (Canada dollars)
= 0.66 USD (US dollars)
2. Press
NEXT
NEXT NEXT
to change
the display and press
SHIFT
SET
. The initial
character of “CAD” starts to flash.
• You can change each currency name by
entering characters (up to four in each) and
using
, if needed.
3. Press
ENTER
. “0” starts to flash.
4. Enter the rate (up to
10 digits).
0.66
5. Press
ENTER
to
store in the memory.
2. Converting currency/unit
You need to set the conversion rate before making
the currency conversion.
Example:
Convert 500 CAD into USD using the
rate that you have set.
1. Display the screen: “CAD → USD”.
2. Enter the value to be converted.
500
3. Press to convert
CAD into USD.
• To convert in
reverse order (e.g.
200 USD into CAD), enter 200 and press .
• You can use the unit conversion in the same
manner. You cannot change the units or the
rates for units.
• The conversion result may have a slight error
as a result of rounding off the number (e.g. up
to two decimal places for currency
conversions). Use the conversion result for
reference.
The Organizer can
calculate numbers of up
to 10 digits. Press
CALC/CONV
several
times to display the Calculator mode screen
(Calculator → Currency conversion → Unit
conversion → Calculator...).
Calculation
Be sure to press
C•CE
,
C•CE
, and
CM
to clear
the display and memory before performing a
calculation.
Note
• When , , , or is pressed, the respective
symbol, +, –, ×, or ÷ is displayed. (In the
examples in this manual, these symbols are not
described.)
If an error occurs
If the calculation result or the integer section in
the numerical value in the memory exceeds 10
digits or if a number is divided by zero (0), an
error occurs (“ERR” is displayed).
Calculation examples
Example Operation
Display
(–24+2)÷4=–5.5
C•CE
24 2 4
–5.5
34+57=91 34 57
91.
45+57=102 45
102.
(The addend becomes a
constant.)
68×25=1700 68 25
1700.
68×40=2720 40
2720.
(The multiplicand becomes
a constant.)
200×10%=20 200 10
%
20.
9÷36=25% 9 36
%
25.
200+(200×10%)=220
200 10
%
220.
500–(500×20%)=400
500 20
%
400.
4
6
=(4
3
)
2
=4096 4
4096.
1/8=0.125 8
0.125
25× 5=125
CM
25 5
M
+
M
125.
–) 84÷ 3= 28 84 3
M
–
M
28.
+) 68+17= 85 68 17
M
+
M
85.
182
RM
M
182.
25–9=4 25 9
ǰȉ
4.
1234567890×145 1234567890 145
ERR
=179012344050
17.90123440
C•CE
17.90123440
(17.90123440×10
10
=179012344000)
ǰȉȉ
0.
0.66
CAD USD
330.
CAD USD
Each time you press
GAME
, the display switches
between “ALPHA ATTACK” and “BLACKJACK”.
ALPHA ATTACK
Type in characters (A to
Z, 0 to 9) displayed on
the first line to clear
them. The game is
divided into 20 levels of speed.
1. Press
GAME
to display the following Game
mode screen.
2. Enter the level
number (two digits
from 01 to 20).
• 01: slow, 20: fast
3. Press
ENTER
to start a game.
4. Press the same key as the first character on
the left end of the first line. (In this case, press
keys in the order: E → Y → 3 → K → W.)
• Pressing the correct key in the correct order
deletes the character.
• When 12 characters are displayed in each
level, the game continues in the faster level
(up to 20).
• When no more characters can be displayed,
the game is over. The Game mode screen
with the level when the game is over is
displayed.
BLACKJACK (Twenty-one)
Make your “hand” (the total of the numbers on
the cards) close to 21, without going over 21.
1. Press
GAME
to
display the following
Game mode screen.
2. Press
ENTER
to start
a game. The left two
J28 32K4
20 19
20 20
Your chipsYour bet
The dealer’s
total
Your total
0.
EURO USD
BLACKJACK
30
Your chips
J28 4
10 20
Your chipsYour bet
Your hand
cards are dealt for you. (One is faced up and
the other is faced down.)
3. Agree the left-displayed maximum bet (up to
10) or enter the fewer bet. You can also press
to bet the maximum.
4. Press
SPACE
to
see your hand.
Each time you
press
SPACE
, a new
card is dealt.
• “J”, “Q”, and “K”
are counted as 10.
• “A” can be counted as 1 or 11.
• When first two cards are “A” and a face card
(“J”, “Q”, or “K”), your hand is
“BLACKJACK”.
5. Press
ENTER
to
stop being dealt and
hold your hand. The
dealer’s hand and the
results are displayed.
• When you win,
your total flashes
and your bet is doubled.
• When you win with “BLACKJACK”, your bet
is tripled.
6. Press
ENTER
to display the Game mode
screen.
• When you have no more chips to bet, the
game is over.
• To quit the game, press
C•CE
or any mode
key. Your chips are stored for the next time.
• To return your chips to 30, press
DEL
and
ENTER
on the Game mode screen.
ALPHA ATTACK
01
Level
EY3KW
01
The dealer’s
hand
1. Checking memory storage
1. Press
TEL
or
SCHEDULE/MEMO
to display
“NAME?”, “SCHEDULE?”, or “MEMO?”.
2. Press
SHIFT
M•CK
.
The remaining
memory space is
displayed briefly.
Notes
• Approx. 2,000 telephone entries can be stored
(when 14 characters are entered for name,
telephone and fax number fields, and 18
characters are entered for address field).
This device offers an English-Spanish bi-
directional word translation function.
1. Press
to enter the English ➝ Spanish
translation mode.
Press twice (or then ) to
enter Spanish ➝ English mode.
2. Enter the desired source word and press
ENTER
.
“English…” or “Spanish…” is displayed while
conducting search. The matching English or
Spanish word will then be displayed.
• When the symbol “ ” is turned on, more
letters exist. To view remaining letters of long
words that cannot be accommodated on the
screen, use to scroll right.
• If there is no matching word, “NOT FOUND!”
is displayed. The word next in alphabetical
order will then be displayed.
• Press
NEXT
or
PREV
to scroll through
word list, or edit entry using the keyboard,
and press
ENTER
for another search.
• Press or to return to the source word.
Caution
•
Spanish words stored in this device are those
of Spain.
• Only the masculine form of the noun will be
displayed for nouns with both masculine and
feminine forms.
• Two identical words may appear in the word
list.
• Enter European characters and spaces
correctly. Otherwise, the unit may not be able
to complete the search.
ENG SPA
1. Registering a password and storing
secret entries
Up to six characters can be registered as the
password.
• One password is valid for Telephone, Schedule,
and Memo modes.
If the password is forgotten, you cannot delete the
password only. You have to delete all the memory
contents. (Perform steps 2 and 3 as described in
the section, “Using the Organizer for the First
Time”.) As a safeguard, make a written record of
the password.
Registering a password
1. Press
TEL
or
SCHEDULE/MEMO
to display
“NAME?”, “SCHEDULE?”,
or “MEMO?”.
2. Press
SECRET
.
3. Enter the password
(case sensitive), e.g. ABC.
4. Press
SECRET
to register it.
• The display returns to the screen in step 1
with the symbol “
”.
• If “ERROR!” appears briefly, a password has
already been registered. Enter the correct
password or delete the password and all the
memory contents.
5. Press
SECRET
SECRET
to turn Secret
function on. “
” disappears.
PASSWORD?
Storing secret entries
1. Enter characters in Telephone, Schedule, or
Memo mode when “ ” is not displayed
(Secret function is on).
• When “
” is displayed, press
SECRET
SECRET
to turn Secret function on.
2. Press
SECRET
before pressing
ENTER
to
store. “
” appears.
3. Press
ENTER
to store a secret entry in the
memory.
• “STORED!” appears briefly, and the display
returns to the mode screen without “ ”
(Secret function is on).
• You cannot display the secret entry until you
turn Secret function off.
2. Turning Secret function on and off
When Secret function is on, “ ” is not
displayed.
• You can display, edit, or delete entries
except secret entries.
• You can enter new entries as secret or
non-secret.
When Secret function is off, “ ” is
displayed.
• You can display, edit, or delete secret
entries only. (You cannot display non-
secret entries.)
• You cannot enter a new entry.
Turning Secret function off
1. Press
TEL
or
SCHEDULE/MEMO
and check
that “
” is not displayed.
2. Press
SECRET
. “PASSWORD?” is displayed.
3. Enter the password and press
SECRET
.
•“
” is displayed and you can display
secret entries.
• If you enter an incorrect password,
“ERROR!” appears briefly. Follow the above
steps and enter the correct password.
• Even when Secret function is turned off, it
will be automatically turned on (“ ” will
disappear):
A)when you press
GAME
,
CLOCK
, or
CALC/CONV
,
or B)after the power is turned off manually
or automatically.
Turning Secret function on
1. Press
TEL
or
SCHEDULE/MEMO
and check
that “
” is displayed.
2. Press
SECRET
.
The password is displayed. Memorize it again.
3. Press
SECRET
again.
“
” disappears and you cannot display
secret entries.
3. Changing the password
1. Turn Secret function off (“ ” appears).
2. Press
SECRET
. The password is displayed.
3. Press
EDIT
.
The initial character of the password starts to
flash.
4. Enter, or edit characters and make a new
password.
5. Press
SECRET
. The new password is now
registered.
• Do not carry the Organizer in the back pocket of
slacks or trousers.
• Do not drop the Organizer or apply excessive
force to it.
• Do not subject the Organizer to extreme
temperatures.
• Since this product is not waterproof, do not use
it or store it where fluids can splash onto it.
• Clean only with a soft, dry cloth.
• Use only a SHARP approved service facility.
• Model: EL-6930
• Product name: Electronic Organizer
• Display: 3 lines of 12 digits
• Memory capacity: 192 KB Equivalent*
• Clock mode:
Accuracy: ± 60 seconds/month at 25°C/77°F
Display: Year, month, day, day of the
week, hour, minute, second, AM/PM
Clock function: 12-hour/24-hour format
(switchable), 3 kinds of date type
(switchable), world clock function, daylight
saving time (summer time) display, daily
alarm, hourly alarm
• Telephone mode: Entering and recalling of
telephone entry (name, address, E-mail
address, phone number, and web address
(URL))
• Schedule mode: Entering and recalling of
schedule entry (details, year, month, day, hour,
and minute), schedule alarm
• Memo mode: Entering and recalling of memo
entry
• Calculator mode: 10 digits (with calculation
status symbols), arithmetical calculations,
percentage, square root, memory calculation,
etc.
• Currency/unit conversion mode:
5 kinds of currency conversion (editable) and 9
kinds of unit conversion
• Game mode: 2 games
• Word Translation function:
Approx. 2,400 words
• Power consumption: 0.003 W
• Operating temperature:0°C to 40°C
(32°F to 104°F)
• Power supply: 3V
…
(DC),
lithium battery
CR2032 × 1
• Auto-power off: Approx. 7 minutes
• Battery life: Approx. 2 years at ambient
temperature of 25°C/77°F, assuming the
following daily use: 30 minutes display, alarm
sounding for 20 seconds and key touch tone
turned on/off 100 times.
• Weight (including battery):
Approx. 88 g (0.19 lb.)
• Dimensions:
Open:
128.0 mm (W)
×
167.1 mm (D)
×
9.0 mm (H)
5-
1
/32" (W)
×
6-
19
/32" (D)
×
11
/32" (H)
Closed:
128.0 mm (W)
×
86.6 mm (D)
×
12.7 mm (H)
5-
1
/32" (W)
×
3-
13
/32" (D)
×
1
/2" (H)
• Accessories: 1 lithium battery (installed),
operation manual
* Memory at 192 KB Equivalent. Approx. 2,000
telephone names & numbers (name, telephone
and fax number are 14 characters and address
is 18 characters per entry) can be stored by
using compression technology. (Compression
Rate Approx. 1.5:1)
Battery used
Type Model Quantity
Lithium battery CR2032 1
•
Improper replacement of the battery may
change or lose the memory contents.
•
Be sure to write down any important
information stored in the memory before
replacing the battery.
•
Make sure the power is turned off before
replacing the battery.
•
Do not press
ON
OFF
until the battery replacement
procedure is completed.
1. Precautions
Since improper use of the battery may cause
leakage or explosion, strictly observe the
following instructions.
• Insert the battery with the positive side (+)
correctly facing up.
• Never throw the battery into a fire because it
might explode.
• Keep the battery out of the reach of children.
Because the battery in the Organizer was installed
at the factory, it may become depleted before the
specified expiration time is reached.
2. Battery replacement
When “LOW BATTERY” is displayed, immediately
replace the battery with a new one. Continued use
of the Organizer with an exhausted battery can
alter or clear the memory contents.
•
Do not use a metallic object to pry out the
battery. The Organizer will be subjected to an
electrical shock and all the memory contents
will be cleared.
•
Make sure to confirm all settings are set
correctly after replacing the batteries.
1. Press
ON
OFF
to turn the power off.
2. Loosen the screw and remove the battery
holder cover on the back of the unit.
3. Remove the exhausted battery by prying it out
from the holder with the corner of the holder
cover. (Fig. 1)
4. Install a new battery with the positive side (+)
facing up into the holder.
5. Replace the holder cover and secure it with the
screw.
6. Press
ON
OFF
to turn the power on.
• If nothing appears on the display, press the
RESET switch and press
C•CE
.
• Do not press
SHIFT
ENTER
. Pressing
SHIFT
ENTER
clears all the memory
contents.
7. Set the clock.
Fig. 1
Word Translation Function
Memory Storage
Secret Function
Specifications
Replacing Battery
Caring for Your Organizer
Calculator Mode
Currency/Unit Conversion Mode
Game Mode
When removing the
battery, use the corner
of the battery holder
cover.
CAPA
%
99
CITY
2. Deleting all the memory contents
Perform steps 2 and 3 as described in the section,
“Using the Organizer for the First Time”.
• To cancel the deletion operation, press
C•CE
instead of
SHIFT
ENTER
in step 3.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-1163
LIMITED WARRANTY
Your Product : Electronic Organizer
Warranty Period for this Product : One (1) year parts and labor from date of purchase.
Additional Items Excluded from Any consumable items such as paper, maintenance cartridge, ink cartridges supplied with the Product or
Warranty Coverage : to any equipment or any hardware, software, firmware, fluorescent lamp, power cords, covers, rubber parts, or periph-
erals other than the Product.
Where to Obtain Service : At a Sharp Authorized Servicer located in the United States. To find out the location of the nearest Sharp Authorized
Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service : Ship (prepaid) or carry in your Product to a Sharp Authorized Servicer. Be sure to have proof of purchase available. If
you ship or mail the Product, be sure it is packaged carefully.
Write to our Customer Assistance Center
SHARP Electronics Corp.
Customer Assistance Center
Att: WIZARD HELP
1300 Naperville Drive
Romeoville, IL 60446
PRODUCT SUPPORT
If you have read the ORGANIZER operation manual,
but you still require product support, you can:
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
Call Sharp Customer Assistance Center
630-378-3590
(7am to 7pm CST M-F)
Visit our Web Site
www.sharpusa.com
Send an E-mail
pdasupport@sharpsec.com
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original
container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or
part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of
which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered
or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET
FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration
of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp
to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs
performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
EL6930(En).p65 04.12.6, 2:20 PM2