Filter
Top Products
Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B 19
Additional installation options
Figure 5. Non-ATA-compatible and cable select jumpers
Non-ATA-compatible slave jumper
If your computer does not recognize your new drive as a master
in a two-drive system, the slave drive may not be ATA-compati-
ble. You may be able to solve this problem by installing jumpers
on pins 5 and 6 and on pins 7 and 8, as shown in Figure 5.
135
24
6
7
8
Master with non-ATA-
compatible slave
Enable cable select