Sanyo CLT-E23 Cordless Telephone User Manual


 
Getting Started [E33]
GETTING STARTED
4) Press vol/ or vol/ to select the handset you want to transfer the phonebook
locations to, and then press /select.
If you choose
All Memory
in the step 2,
Are you sure?
appears.
Press vol/ or vol/ to select
Yes
, and then press /select.
The phonebook locations will be transferred to the handset. On the receiving handset,
Receiving
and the handset name appear. When the transfer is complete,
Done!
appears
on the handset.
Voice Mail Tone
1) Enter the Global Setup menu, and then the Voice Mail Tone
submenu (see "Entering the Menu" on page E25).
2) Press vol/ or vol/ to set the voice message indication
(SDT message signal) to
On
or
Off
.
3) Press /select. You will hear a confirmation tone.
Notes:
• If an error occurs, the phonebook locations transferred before the error were stored in the receiving
handset.
Unavailable
appears on the display.
When the memory of the receiving handset is full,
Not enough memory in Receiving Handset
appears.
You cannot transfer the phonebook location.
8QKEG/CKN6QPG
1P
1HH
UP383BA_0.book Page 33 Thursday, May 26, 2005 10:48 AM