Sanyo CLT-D6620(WH) Cordless Telephone User Manual


 
19
Calling stored numbers
1. Touch .
2. Touch and to scroll to the entry you wish to dial.
OR
Touch the 1 - 9 key corresponding to the 1
st
letter of the entry and use
and
to select name you are seeking; for example names beginning
with “R” touch
7 three times.The rst location that begins with the letter you
entered appears.
3. Touch to dial.
You must subscribe to Caller ID service through you local telephone company to
use these feature.If a caller number matches one of the number in the phone-
book, the display will show the name information in the stored memory even if
the incoming call does not have the name.
NOTE: Check with your local telephone company regarding name service.
Caller ID with call waiting
When you subscribe to Caller ID with Call Waiting service from your telephone
company, you are able to see who is calling when you hear the Call Waiting
beep. Caller identication information appears on screen after you hear the
beep.
Touch key to put the current call on hold so that you can answer the
incoming call. To return to the rst call, touch again.
Call log
The incoming caller information transmitted from the telephone company is
received by your phone between the rst and second ring and stored in the Call
log. If you answer a call before the second ring the caller information may not be
stored.
When the Call log memory is full, a new call automatically replaces the oldest
call in memory.
PHONEBOOK
CALLER ID DISPLAY