Filter
Top Products
Getting Started [E15]
GETTING STARTED
• Use only the supplied SANYO AC adapter. Do not use any other AC adapter.
4) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE jack
and to a telephone outlet.
Notes:
•Connect the AC adapter to a continuous power supply.
•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
Important:
• Place the power cord so that it does not create a trip hazard or where it could become chafed and
create a fire or electrical hazard.
• After installing the battery pack in the handset, charge your handset at least 15-20 hours before
plugging into the phone line.
Tip:
If your telephone outlet isn't modular, contact your
telephone company for assistance.
UP383BA_0.book Page 15 Thursday, May 26, 2005 10:48 AM