Filter
Top Products
red on other keysets.
You never lose sight of your calls while they are on hold. They stay
right where you put them and are identified with a green flashing light.
Some simple rules to remember:
• Any steady LED indicates the line or feature is in use.
• A fast flashing green LED indicates a new call incoming call.
• A slow flashing green or red LED indicates a call is on hold.
• A slow flashing amber LED indicates a recall to your keyset.
S P E A K E R P H O N E
Pressing the A N S / R L S key will answer or release a call on the
speaker phone.
Switching from the handset to the speaker phone is easy. Press the
S P E A K E R key and hang up the handset.
HOT KEYPA D
On the DCS, your keysets keypad can be made "live" or "hot" so that
it is not necessary to lift the handset or press S P E A K E R before you
begin dialing. Calls can be made and features activated by simply
dialing the outside line number, line access code, intercom number or
feature access code.
If the Hot Keypad feature has been turned off, you must first lift the
handset or press S P E A K E R before dialing.
VOLUME CONTROLS
DCS keysets use the U P & DOWN keys to adjust the ringer volume
while the keyset is ringing, the speaker volume while the
speakerphone is in use and the handset volume while you are
listening. These three levels will be stored in memory until changed. If
background music is turned on at your keyset, the volume keys will
also control the level of music. The volume of pages heard through
the speaker of keyset can be adjusted during a page announcement
by using the volume keys. There are 16 levels for each volume
setting. The volume of off-hook ring is controlled by a user-
programmable setting.
SYSTEM TO N E S
The system provides several tones to assist you. Some of these tones
are already familiar to you.
2
»£¡÷«‚USER- ∫ª πÆ 98.7.16 12:52 PM ∆‰¿Ã¡ˆ2