Filter
Top Products
2-6
Chapter 2
Setting the Working Environment for ITP-5000D Series IP Phones
• To upgrade the phone’s bootrom select ‘3.Upgrade Bootrom’ then ‘1.TFTP
server’.
Enter the IP address of the TFTP server from which the program should be
downloaded. Press the [Enter] button to start the download.
The phone is rebooted after downloading the Bootrom program and the
environment setup main menu appears.
• The ‘[4. Format]’ option is used to delete previously saved programs. Check
if the program needs to be deleted before using this function.
Server Menu (Setting System Authentication Information)
Select the ‘5.Server’ option on the main menu to set the IP address of the
OfficeServ system connected to the IP phone and the authentication ID and
password of the phone. (The ID and password are required if the OfficeServ
system is set to request this information.) The following screen is displayed.
• To set/modify the IP address of the OfficeServ system, select ‘1.Server IP’.
The following screen is displayed.
The address is left blank if it is not set. Use the dial buttons [0] to [9], and [*] to
set the address and press the [Enter] button to save and exit.
Input TFTP Server
xxx.xxx.xxx.xxx
Input Server IP
xxx.xxx.xxx.xxx
1.Server IP
2.ID