Filter
Top Products
1
Enter Pairing mode.
2
Search for and pair with your phone according to
your phone’s user guide. (Bluetooth PIN: 0000,
4 zeros)
If the pairing is successful, the blue indicator
light will flash 10 times rapidly before entering
Standby mode.
If the blue indicator light remains lit, retry pairing.
NOTE:
When the headset and the phone are paired, the
headset attempts to reconnect automatically each
time it turns on. Otherwise, press the Multi-function
button to reconnect.
Understanding various modes
Pairing with your Bluetooth phone
Specifications
Some functions may not be supported by your phone.
Using call functions
Press the Multi-function button to:
Answer an incoming call
Redial the last number called
In Standby mode
In Active mode
Standby mode: The headset is waiting for a call.
The blue indicator light flashes every 3 seconds.
Active mode
:
The headset has a call in pro
g
ress.
: The headset has a call in progress.
The blue indicator light flashes every 8 seconds.
Pairing mode: The blue indicator light stays lit.
You can discover and connect to your headset on
your phone.
Low battery mode
:
There is less th
a
n 1
0
%
of
: There is less than 10% of
battery power left. The red indicator light flashes.
You must recharge the battery.
Press and hold the Multi-function button to:
Make a voice-activated call
Reject an incoming call
Press the Multi-function button to:
End a call
Transfer a call from the phone to the headset
Press and hold the Multi-function button to:
Place a call on hold
Answer a second call
Rretrieve a call on hold
Press [+] or [-] to adjust the volume.
Press and hold [+] or [-] to turn the microphone off
or on.
Bluetooth version 2.0 + EDR
Support profile Headset Profile, Hands-Free Profile
Operating range Up to 30 feet (10 meters)
Maximum
Standby time
Up to 100 hours*
Maximum Active
time
Up to 6 hours*
Items
Specifications and description
*Depending on the phone type and usage, the actual time may vary.
Make sure that the headset is off, and press and
hold the Multi-function button until the blue
indicator light remains lit after blinking.
If you turn it on for the first time, it proceeds into
Pairing mode immediately.