Filter
Top Products
GETTING STARTED
Using your new SVMi E-Series Subscriber Services is as simple as following a few
simple spoken instructions. First time users should read this section as a tutorial.
You should start with the following steps:
• Access your Subscriber Services Menu - You already know how to do this.
From the Subscriber Services Menu:
• Record a Primary/No-Answer Personal Greeting.Dial [5][1].
• Record a Mailbox Greeting.Dial [5][7].
• Change your access code (Password).Dial [#][7][1].
• Record your name.Dial [#][7][2].
• Enter your directory name.Dial [#][7][3].
After you have completed the steps above your Subscriber Services are set up and
ready to use.
LISTEN TO YOUR MESSAGES
If there are new messages in your mailbox your [VMMSG] key will be lit.Call the
SVMi E-Series by pressing this key,and when prompted enter your password.You
will then be at the Subscriber Services Menu.Select [1] to listen to new messages
or [3] to listen to saved messages.
Note:After you enter your password,if “Autoplay of New Messages”is enabled and
you have new messages the SVMi E-Series will begin to play them automatically.
A subscriber can control this feature. From the Subscriber Services Menu [6] [5]
toggles “Autoplay of New Messages”ON/OFF.
SUBSCRIBER SERVICES MENU
The following is a list of all the options available in the Subscriber Main Menu.
1 LISTENING TO NEW MESSAGES
11 GROUP NEW MESSAGES
2 RECORD AND SEND A MESSAGE
3 LISTENING TO OLD MESSAGES
33 GROUP OLD MESSAGES
4 ACCESS MANAGER
5 PERSONAL GREETINGS
6 MAILBOX ADMINISTRATION
8 PAUSE / RESUME
63
ds_phones.qxp 5/11/2006 8:07 AM Page 69