Filter
Top Products
2-Line LCD Phones
(DS-5007S / 5014S / 5038S / 5014D / 5021D & ITP-5014D / 5021D)
48 CHARACTER DISPLAY
PROGRAMMABLE BUTTONS
SOFT KEYS (3)
Used to activate
features via the
display
SCROLL KEY
Used to select start
menu and scroll through
display options
With tri-coloured LEDs:
BUTTONS
SPEAKER
For hands-free operation
(Used in place of handset)
= Set up a conference call = Hold calls
with up to four others
= Last number redial
= Transfer current call (or enter
= Switch on speakerphone
QUICK REFERENCE GUIDE
VOLUME CONTROL
The programmable buttons above the keypad are arranged in rows of 1x7 (7) buttons or 2x7
+
right. By default, keys 1 and 2 are set as CALL keys. CALL keys flash for incoming calls.
(14) buttons or 3x7 (21) buttons and are numbered from 1 to 7 or 14 or 21 from top left to bottom
5014D keyset has 14
5021D keyset has 21
TRANSFER BUTTON
SPEAKER BUTTON
HOLD BUTTON
CONFERENCE BUTTON
MICROPHONE
NAVIGATION BUTTONS
STATUS INDICATOR LED
Shows the current status of
the keyset (busy, message
Navigation buttons comprise: (Send), (Menu), (Cancel), (End), (Enter)
and direction (arrow) buttons and are used to navigate through features and menus on the display.
MMC programming mode)
For navigating through
LCD menus and features
QUICK REFERENCE GUIDE
QUICK REFERENCE GUIDE
waiting, etc.)
2 x 24-character lines
QUICK REFERENCE GUIDE
ENGLISH
ENGLISH
ENGLISH
5007S keyset has 7
5014S keyset has 14
5038S keyset has 21
(DS & ITP-5014D / 5021D)
The DS-5038S keyset has 17
further programmable buttons
in place of Navigation Buttons
REDIAL BUTTON
(numbered 22 to 38 from top
ring, speaker, etc.
Volume control for handset,
left to bottom right, horizontally)
e