Filter
Top Products
5
RF-QX5 Noise Cancelling Wireless Headset
Components
# Component Description
1
Volume up Press to increase the earpiece volume.
2
Power/Send/End button • Switches the headset on and off.
• Answers incoming calls.
•Ends active calls.
• Rejects incoming calls.
•Voice dials.
3
Indicator light Power on—Lights solid yellow-green for 1 second and the headset beeps
once.
Pairing mode—Rapidly flashes yellow-green.
The flashing continues for approximately three minutes or until the headset is
connected to a compatible phone. If the headset is not connected to a phone
during this time, the headset enter connectable status.
Connectable—Flashes yellow-green once every 2.5 seconds.
Connection active—Flashes yellow-green every 5 seconds.
Incoming call—Flashes yellow-green two times every 1 second.
Active call—Flashes yellow-green every 5 seconds.
Power off—Lights solid red for 1 second and the headset beeps once.
Low battery—Alternately flashes yellow-green and red, and the headset
beeps every 300 seconds.
4
Charger connector Connect the charger to this jack and to a power outlet to charge the battery.
5
Volume down Press to decrease the earpiece volume.
6
Earpiece Transmits the callers voice.