Filter
Top Products
7
RF-SH230
Battery life may seem short when you first use the headset.
The battery will fully charge after two or three complete
charge/discharge cycles.
Pairing the headset
Auto-pairing
For added convenience, your headset has an auto-pairing
function so that when you turn the headset on for the first
time, it is already in pairing mode. Your headset should beep
every two seconds to indicate that it is in pairing mode, and
can be paired to your mobile phone.
To pair your headset:
1 Put the mobile phone into pairing mode (see your
mobile phone user manual). Make sure that the mobile
phone is no more than three feet (one meter) away from
the headset.
2 Select the headset name “RF-SH230”.
3 Enter the PIN number: 0000. If pairing is successful, the
beeping stops and the indicator flashes every three
seconds.
Normal pairing
Complete this procedure if you want to pair your headset
with another mobile phone.
To pair your headset:
1 Make sure that the headset is turned off.
2 Put the headset in pairing mode by pressing and holding
the multi-function button for about five seconds. The
indicator light should flash twice every second and you
should hear a series of beeps every two seconds.
3 Complete the auto-pairing procedure.